MPO/MTP® high-density fiber
Pre-terminated trunks, cassettes, harnesses and ultra-dense enclosures for spine-leaf fabrics.
Fiber → OpticsTransceivers up to 400G
SFP+ to QSFP-DD, plus DAC, AOC and breakouts, coded and tested for your platforms.
Optics → Copper & OOBStructured copper & out-of-band
Cat6A and Cat8 channels, high-density panels, and a separate network for console and IPMI.
Copper & OOB →Factory-terminated fiber that installs in minutes.
MPO/MTP® connectors carry 8, 12, 16 or 24 fibers in one push-pull interface. Pre-terminated and tested before shipment, they remove field splicing and turn speed upgrades into a cassette swap.
- Trunks in OM3, OM4, OM5 multimode and OS2 single-mode, cut to length
- MPO-to-LC cassettes and fan-out harnesses
- High-density 1U, 2U and 4U enclosures with slide-out trays
- Low-loss connectors for tight optical budgets
- APC polish for single-mode parallel optics such as 400G DR4
- Insertion-loss and return-loss reports with every assembly
Match the trunk to the optics
| Architecture | Connector | Typical applications | Why choose it |
|---|---|---|---|
| Base-8 | MPO-8 / MPO-12 (8 used) | 40G SR4, 100G SR4, 400G DR4, 4 × 100G breakout | Full fiber use with parallel optics |
| Base-12 | MPO-12 | Legacy 10G fan-outs, structured backbone | Matches existing 12-fiber plant |
| Base-16 | MPO-16 | 400G SR8, 800G SR8, 2 × 400G breakout | Path to 800G without re-cabling |
| Base-24 | MPO-24 | High-count trunks | Most fibers per connector in tight pathways |
10G access to 400G spine.
MSA-compliant optics with DDM/DOM diagnostics, coded for your switch and NIC platforms and tested in host equipment before dispatch.
| Optic | Fiber | Connector | Typical reach | Where it fits |
|---|---|---|---|---|
| 400G SR8 | OM4 | MPO-16 | 100 m | Leaf-to-spine within a hall |
| 400G DR4 | OS2 | MPO-12 APC | 500 m | Spine links; 4 × 100G breakout |
| 400G FR4 | OS2 | Duplex LC | 2 km | Between halls and buildings |
| 400G LR4 | OS2 | Duplex LC | 10 km | Metro and edge interconnect |
| 100G SR4 | OM4 | MPO-12 | 100 m | Server and leaf uplinks |
| 100G LR4 | OS2 | Duplex LC | 10 km | Edge sites to core |
Copper built for 10G and beyond.
- Cat6A shielded and unshielded for 10GBASE-T up to 100 m
- Cat8 for 25G/40GBASE-T on runs up to 30 m
- Pre-terminated copper trunks for fast rack installs
- High-density flat and angled panels, 48 ports in 1U
- Slim, color-coded patch cords for airflow and port management
- Every link labeled and certified against TIA/ISO limits
A back door you can always reach.
- Dedicated management switching, separate from production
- Console servers for serial access to network equipment
- Optional cellular failover for remote sites
- Cabling for IPMI, iDRAC and iLO management ports
- Integration with NexisRack monitoring and smart PDUs
- Built for unmanned edge sites and multi-site rollouts
Delivered as a tested, documented system.
-
01
Port design
Port maps, fiber counts, polarity plans and tray routing for ToR, EoR or MoR.
-
02
Pre-termination
Trunks and harnesses built to measured lengths, tested and labeled in the factory.
-
03
Install
Panels, cassettes and cable management fitted inside your NexisRack cabinets.
-
04
Certify
Fiber and copper certified against TIA and ISO limits, with per-link results.
-
05
Document
TIA-606 labeling and as-built records so every port stays traceable.